Track Cutting Door Frame Steel Window Frame Shutter Door Frame Cold Roll Forming Machine

1

2

Manual Uncoiler

• Width of feeding: 350mm
• Capability: 3 Ton
• Bound of expand &fight: 380mm—520mm
• Mode of expand &fight: inner expand &fight by manual
• Way of feeding: manual
• Quantity: 1

• Armed adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to punching
• Entrance table-guide: adjustable
• Entrance width range:10-25mm
• Entrance and guide roller: diameter is ￠65mm, material is sae1045, surface with chrome
• Quantity: 1

• Machine adopt 25Tons punching machine
• Feeding by air pneumatic

• Air pneumatic power: 3KW (provide by buyer)
• Punching mold: Cr12 with heat treatment

Main Roll Forming Machine

• Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
• Roll station:15stations +1 station of rectify
• Roller material: GCR15, HRC 58-60
• Shaft diameter: ￠75mm material: SAE1045

Machine structure:

• Main frame by 350H beam welding
• Machine structure: Wire electrode cutting
• Drive by Gear box

• One station after roll forming,
• Function: for revise the end product up and down/ left and right to straightness
• Roller material: Roller material: GCR15 quenched 58°-62°finishing turning CNC
• Adjust by hand wheel
• Quantity: 1

Hydraulic cutting system

• Cutting & Punching after forming: Cut the sheet after roll forming to required length
• Material of blade/punching mould: Cr12, 58-62 HRC hardness
• Power by hydraulic,5.5KW
• Servo track power: 2.9KW
• Working pressure: 12-16Mpa adjustable
• Length measuring: Automatic encoder length measuring
• Tolerance of length: +/- 1.5mm for each piece end product

Hydraulic System

• Hydraulic power: 5.5kw
• Working pressure: 12-16Mpa adjustable

• Solenoid valve: 1 group
• Hydraulic oil: 46# hydraulic oil

• Quantity :1

Computer Control Cabinet

• Programmable setting of profile length and quantity
• Operating system language: English and Chinese
• Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
• Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
• Length inaccuracy can be amended easily.
• Control panel: Button-type switch and touch screen
• Unit of length: millimeter

Out table

• Jointed by steel tube
• Size: about 2.0m long*0.8mwide*0.6-1mhigh
• One out table with three support roller
• Quantity: 3 units

Spare Parts

• Bearing: 2 pieces.
• Limit switch: 2 pieces
• Relay: 2 pieces.
• Oil tube: 1 pieces.
• Screws and nuts: some.
• Chain: 1 piece
• Tools: spanner, hex spanner and adjustable wrench and other correlative adjust machine tools